Projects – Barnacoat

Anti-friction metal bearing

0 min read

Heating of a tin-based anti-friction metal bearing for subsequent spin casting. Later this ring will be machined and cut to

0 min read

Casting of an antifriction metal bearing by centrifugation. The inner diameter of the bearing is 1,100 mm. This bearing will

0 min read

Projection of tin-based anti-friction wire by metallization on discs with an internal diameter of 1,200 mm and 35 mm thick.

0 min read

In paper mill Pope rollers, the existing coating on the roller is eliminated by grinding with a diamond grinding wheel,

0 min read

High speed coating (HVOF) with tungsten carbide in hydroelectric power plant nozzles. Once coated, they are finished on their surface

0 min read

Worn piston received for repair. It is prepared around reducing the diameter and later a coating is applied to prevent

0 min read

A rotor with a seized bearing neck is received. It is mechanically prepared on the lathe and subsequently reloaded with

0 min read

Seized single piston liner is received. The 700mm bore by 250mm length is prepared on the lathe. Once the liner